API 600 Cast steel gate valve

Overview
Cast Steel Gate Valve design and manufacture according to API 600 standard or BS 1414, API 600 is from the American Petroleum Institute, a standard for bolted bonnet Steel gate valves –flanged and butt welding ends, for petroleum and natural gas industries
BS 1414 is equal to API 600 standard for OS&Y, solid or flexible wedge, rising stem gate valve size from 2 inches to 24 inches, class 150 to class 2500. and also covers cast steel from 26 inches to 42 inches, class 150 and class 300 only.
EWOM’s cast steel gate valve Manufactured to API 600/BS 1414, Bolt bonnet, Flanged standard to ASME B 16.5 and butt welded according to ASME B16.25, has a function to open and close to control the fluid of oil and gas for pipeline and provide maximum service life and dependability.
EWOM cast steel valve is a type of valve that can be used in many different systems. They provide a constant and dependable service, making them ideal for steam, air, oil, or vapor installations.

Cast steel gate Valve Design Code
API 600, ISO 10434,BS 1414,ASME B 16.34,ASME B16.10
Construction
Rising stem, OSY, flexible or solid wedge, renewable or welded seat ring.Full port, Bolt bonnet, Pressure seal bonnet

Bolt bonnet
One of the most common joints for a gate valve is the bolted-bonnet joint. It’s used on a majority of industrial valves and is found in most factories and plants today.
The bolted bonnet connection requires a seal. Sheet gaskets are typically used for lower-pressure connections and metallic ones are needed for higher-pressure joints.

OS&Y

Outside screw yoke, makes it easy to open and close a gate valve by moving a gate. When you raise the gate, water will flow past it. Closing the gate closes off that passage from the water.

Range of Materials
API 600 Gate Valves can be made out of different materials, Cast steel, stainless steel, alloy steel, super duplex steel. In this way, cast steel gate valve is designed for maximum service life and dependability.
Body
Cast steel:A216 WCB, WC6, WC9, A352 LCB;Stainless steel: A351 CF8, CF8M, CF3, CF3M;Duplex steel :A995 4A, A995 5A, A995 6A;Other:Alloy 20, Monel, Inconel, Hastelloy
Trim
13Cr, SS 316, A20, Monel, Hastelloy C,UNS S31254 stem and wedge
Disc
Flexible,solid,double-gate or parallel slide
Seat rings
Integral,screw or welded seated in place
End Choice
Flanged ASME B 16.5 or butt welded ASMEB16.25
Operated
Manual or linear actuator handwheels, chain wheels and gears

Test
FET CLASS A or CLASS B(Low Emmisions MESC-77/300A/2008),API 598,HIC,API 598 etc

 

Catalog
GATE VALVES
Orlen Gate Valve_ Solid wedge without Backseat bushing

Category:
API 600 Cast steel gate valve
$1.00
× How can I help you?